BX-VITRIFIED

Marble, Natural Stones and Recomposed Materials that are Subject to deformaon or staining due to water absorpon require a reacve adhesive.

Materials and Special Surfaces

Marble, natural stones and recomposed materials in general may have characteriscs that vary even with reference to materials of the same chemical and physical nature. For this reason it is essenal you consult Buildxpert India Helpline to request specific indicaons or to carry out a test a sample of the material. Check for the presence of any really consistent traces of rock dust created during cung and remove them if found.

BX-VITRIFIED
CHARACTERISTICS=TE
CLASS=C2

Flexible Mineral Adhesive To Fix Vitrified Tiles And Natural Stones

COMPLIANT WITH EN 12004 STANDARD

AREAS OF USE

Surfaces
Cement-based Screeds And Mortars	Waterproofing Products	Plasterboard - Line And Cement-based Plaster/renders
Cement And Gypsum-based Plaster	To Overlay Exisng Floors	Heated Floors Renders
Cellular Concrete, For Internal Use	Fibro Cement Slabs	Concrete Surfaces

Materials
Ceremic Tiles	Marble And Natural Stone	Internal Insulang And Soundproofing
Vitrified Tiles	Indian Marble	Panels
Terracoa	Various Mosaics

Uses
Adhesive And Finishing	Terraces And Balconies	Commercial Applicaons
Floors And Walls	Swimming Pools And Fountains	Street Furniture
Internal Use - External Use	Saunas And Spa
Overlaying	Domesc Applicaons

TECHNICAL DATA COMPLIANT

Pack	20 kg
Shelf life	= 12 month in the original packaging protect from humidity
Adhesive thickness	From 2 to 15 mm
Coverage	= 1.3 kg/m² per mm of thickness
Temperature of the air, substrates and materials from +5℃ to +35℃
Port Life	+35℃	4 hrs
Open time	30℃ -35℃	25 Min
Adjustability time	23℃	15 Min
Foot Traffic/grouting of joints	+35℃	18 Hrs
Grouting in walls	+35℃	14 Hrs
Ready for use at	23℃ / +35℃
light foot traffic	= 4/2 days
heavy traffic	= 6/3 days

Performance

After 28 days Durability test :
Tensile adhesion (concrete/porcelain les)	≥0.8 N/mm²	EN 1348
- Adhesion aer heat ageing	≥0.8 N/mm²	EN 1348
- Adhesion aer water immersion	≥0.8 N/mm²	EN 1348
- Adhesion freeze-thaw cycles	≥0.8 N/mm²	EN 1348
Working temperature	from -30℃ to +80℃